Home › Forums › WSB Reader Recommendations › Company to blow insulation ???
- This topic is empty.
-
AuthorPosts
-
August 7, 2009 at 12:29 am #591818
ToddinWestwoodMemberI am looking for someone to blow some more insulation in our attic this fall.
I know I could probably do it myself, but I am busy.
thanks.
August 7, 2009 at 1:04 am #674118
MargLMemberWe had Clean Crawls – http://www.cleancrawl.com come redo the insulation in our attic and crawlspace a couple years ago. They vacuumed out the old shredded wood stuff in the attic and replaced it with blown in insulation and re-did all the insulation under the floors. They did a good job and I thought it was reasonably priced.
August 7, 2009 at 3:42 am #674119
JenVMemberhey bro..Uncle Bunkle has the skills. Will do it in return for his ladder. Give us a call. ;)
August 7, 2009 at 4:07 pm #674120
ToddinWestwoodMemberuhh, Last time I asked, he said just keep it in the garage. I can take it back whenever.
August 7, 2009 at 4:20 pm #674121
JenVMembercheck your email.
August 7, 2009 at 6:01 pm #674122
Mike D.ParticipantToddinWestwood – Make sure any company/contractor/person you hire is well versed in the subject proper Air Sealing before they install insulation.
http://www.energystar.gov/index.cfm?c=home_sealing.hm_improvement_sealing
October 2, 2010 at 6:28 am #674123
wsgolferMemberTodd, did you find someone to insulate your attic? If so, would you recommend them?
October 2, 2010 at 9:42 pm #674124
BlendParticipantHHL Insulation is a West Seattle company and they rock!! They are well versed in everything and will help you come up with solutions. Also help you get a rebate for PSE if you qualify. The rebates are cool cause they are instant and they take the cost right off your bill.
But yah..HHL all the way!! Their website is HHL-Insulation.com. Or call at 206.510.8800.
I am trying to get the owner to become a WSB sponser..so prolly soon you will see him over there
>October 3, 2010 at 1:25 am #674125
wsgolferMemberThanks for the recommendation, ACC! I’ll give HHL a call.
-
AuthorPosts
- You must be logged in to reply to this topic.
