Home › Forums › Open Discussion › Jump Start?
- This topic is empty.
-
AuthorPosts
-
December 27, 2008 at 2:07 am #589229
DianeParticipantmy car has been buried 13 days; just cleared snow/ice off and tried to start; it started at first, but will not restart; my car is parked on Hinds & Belvidere (which has never been plowed), so I didn’t feel safe to try to drive at all, which I think it needs after restart to recharge system; snow/slush/ice is still pretty thick on these streets; 37th is clear pavement, just one block below steep hill, but I can’t get my car down there; I tried calling city number for snow plow on Hinds, but just getting busy signal; I’m so tired of being stuck here, hoping rain/warm will wash away snow on Hinds tomorrow enough to safely drive; anyone up to helping me with a jump; I have cables in my car (which I often use to help others with a jump; first I’ve needed for myself); thanks, Diane; divincent@aol.com, 206-949-7377
December 27, 2008 at 2:29 am #652264
KenParticipantI am no help but this map link may help someone else figure out if they are nearby.
December 27, 2008 at 2:47 am #652265
DianeParticipantI’m directly east from California (near Spiro’s, Bohemian)about 7 blocks on Hinds; I live on 37th & Hinds; my car is parked 1 block up hill from 37th; the street where my car is parked is flat
December 27, 2008 at 3:05 am #652266
JoBParticipantDecember 27, 2008 at 6:39 pm #652267
DianeParticipantthanks JoB; the plows still have not come (I called last night at 8); so I’m waiting for the big melt; still too much snow up on those streets around my car; hoping Sunday will be the day to finally release my car and myself to freedom again; would love to have some help tomorrow?
December 27, 2008 at 6:55 pm #652268
JoBParticipantDecember 29, 2008 at 4:17 am #652269
DianeParticipantThanks to JoB and Jody for offers of help
~
Thanks to Tas tonight for the jump start; I am beyond thrilled to have my car back running after 15 days buried by snow
December 29, 2008 at 4:21 am #652270
JoBParticipant -
AuthorPosts
- You must be logged in to reply to this topic.